Technical Drawing
AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →21 prompts matching "scales"
Quiz: 2. Identify the types of scales: plain, diagonal, comparative and vernier
Set me a quick recall test on 2. Identify the types of scales: plain, diagonal, comparativ
Subscribe to unlock allSpot my mistake: Consolidation of polygons, scales, enlargement and reduction, equal areas, tangency and loci
Show me a worked example on consolidation of polygons, scales, enlargement and reduction,
Subscribe to unlock allTeach me: What a scale is and how the representative fraction works
You are my personal SS3 Technical Drawing tutor. Teach me what a scale is and how the repr
Subscribe to unlock allQuiz: Constructing a plain scale
Act as my SS3 Technical Drawing tutor and quiz me on constructing a plain scale. Ask five
Subscribe to unlock allLet me explain: Constructing a diagonal scale and reading it
I have just studied constructing a diagonal scale and reading it in my SS3 Technical Drawi
Subscribe to unlock allWAEC prep: The scale of chords and its use in setting out angles
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock allPractice set: Constructing a diagonal scale to a stated RF
Act as my SS3 Technical Drawing tutor. Give me five practice questions on constructing a d
Subscribe to unlock allPractice set: Drawing a floor plan to a stated scale
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a floor
Subscribe to unlock allPractice set: Drawing a floor detail to scale
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a floor
Subscribe to unlock allPractice set: Drawing a truss to scale
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a truss
Subscribe to unlock allTeach me: Constructing an isometric scale
You are my personal SS3 Technical Drawing tutor. Teach me constructing an isometric scale,
Subscribe to unlock allQuiz: 4. Apply standard conventions for scale statement
Set me a quick recall test on 4. Apply standard conventions for scale statement at SS1 lev
Subscribe to unlock allTeach me: 1. Describe the uses of scale in technical drawing
I am an SS1 student studying Scales in Technical Drawing. Explain 1. Describe the uses of
Subscribe to unlock allLet me explain: 3. Construct a plain scale to a given representative fraction
I am going to explain 3. Construct a plain scale to a given representative fraction to you
Subscribe to unlock allSpot my mistake: 4. Construct a diagonal scale and use it to read to three units of measurement
Give me a wrong or muddled explanation of 4. Construct a diagonal scale and use it to read
Subscribe to unlock allPractice set: Success: five dimensions set off from the diagonal scale correct within 0.5 mm
Set me five practice tasks on success: five dimensions set off from the diagonal scale cor
Subscribe to unlock allWAEC prep: Success: all five scale-factor calculations correct to two decimal places
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Subscribe to unlock allQuiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Subscribe to unlock allLet me explain: Drawing to a scale of 1:20 a section through a strip foundation
Act as my study partner. I will teach you drawing to a scale of 1:20 a section through a s
Subscribe to unlock allSpot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines
Subscribe to unlock all