Technical Drawing
AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →296 prompts matching "Up a poorly dimensioned drawing on the board"
Teach me: The A2 ISO drawing board and how the sheet is fixed to it
You are my personal SS3 Technical Drawing tutor. Teach me the A2 ISO drawing board and how
Subscribe to unlock allTeach me: Reactions at the supports of a simple frame
You are my personal SS3 Technical Drawing tutor. Teach me reactions at the supports of a s
Subscribe to unlock allLet me explain: The drawings that make up a set of working drawings
I have just studied the drawings that make up a set of working drawings in my SS3 Technica
Subscribe to unlock allWAEC prep: The conventions of BS 1192 for building drawings
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock allSpot my mistake: Reading the representative fraction as the ratio of the drawing to the sheet rather than to the object
Act as my SS3 Technical Drawing tutor. Write a short answer on reading the representative
Subscribe to unlock allSpot my mistake: Drawing a tangent that meets the radius at the point of contact at any convenient angle
Act as my SS3 Technical Drawing tutor. Write a short answer on drawing a tangent that meet
Subscribe to unlock allSpot my mistake: Drawing the true helix of a screw thread rather than its conventional representation
Act as my SS3 Technical Drawing tutor. Write a short answer on drawing the true helix of a
Subscribe to unlock allSpot my mistake: Treating isometric drawing and true isometric projection as giving a view of the same size
Act as my SS3 Technical Drawing tutor. Write a short answer on treating isometric drawing
Subscribe to unlock allPractice set: Setting up a drawing sheet with border and title block
Act as my SS3 Technical Drawing tutor. Give me five practice questions on setting up a dra
Subscribe to unlock allLet me explain: The escribed circle and how it is constructed
I have just studied the escribed circle and how it is constructed in my SS3 Technical Draw
Subscribe to unlock allLet me explain: The angle of inclination of a line to a plane
I have just studied the angle of inclination of a line to a plane in my SS3 Technical Draw
Subscribe to unlock allLet me explain: The second auxiliary projection
I have just studied the second auxiliary projection in my SS3 Technical Drawing class. Let
Subscribe to unlock allLet me explain: Abbreviations used on engineering drawings
I have just studied abbreviations used on engineering drawings in my SS3 Technical Drawing
Subscribe to unlock allLet me explain: The detail drawing and what it must show
I have just studied the detail drawing and what it must show in my SS3 Technical Drawing c
Subscribe to unlock allLet me explain: The part or local section
I have just studied the part or local section in my SS3 Technical Drawing class. Let me ex
Subscribe to unlock allLet me explain: Drawing an isometric circle by the four-centre method
I have just studied drawing an isometric circle by the four-centre method in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in:
Quiz: Setting up a one-point perspective
Act as my SS3 Technical Drawing tutor and quiz me on setting up a one-point perspective. A
Subscribe to unlock allLet me explain: Converting a first angle drawing to third angle
I have just studied converting a first angle drawing to third angle in my SS3 Technical Dr
Subscribe to unlock allLet me explain: The line of intersection of two planes
I have just studied the line of intersection of two planes in my SS3 Technical Drawing cla
Subscribe to unlock allWAEC prep: The grades of pencil used in technical drawing
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock all