Technical Drawing

I am going to explain 3. Explain why triangles on the same base and between the same paral

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Let me talk you through 1. State the purpose of drawing standards from the Drawing Standar

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p

Quiz me on 2. Distinguish between enlargement by ratio of sides and by ratio of areas, fro

Write a short SS1 Technical Drawing answer about 4. Verify the accuracy of an enlargement

Show me a worked example on 1. State the principle of tangency and its applications with a

Set me a small project on that the tangent is perpendicular to the radius at the point of

I am going to explain 3. Determine true lengths of the edges of full and truncated solids

Give me a wrong or muddled explanation of 4. Prepare the pattern development of a pyramid

Show me a worked example on the meaning of development and its applications with an error

Show me a worked example on 4. Produce models of geometrical solids from their development

Let me talk you through 3. Produce the front elevation, end elevation and plan of a given

Give me a practice set on cavalier and cabinet oblique of the same block so students can s

You are my personal SS1 Technical Drawing tutor. Teach me 1. Define technical drawing in y

Be my SS1 Technical Drawing teacher for this one point: 1. Demonstrate safe handling of th

You are my personal SS1 Technical Drawing tutor. Teach me 1. Identify the types of lines u

Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle

Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o

Act as my study partner. I will teach you 3. State the properties of regular polygons incl