Technical Drawing

Show me a worked example on dimension a drawing using the aligned and the unidirectional s

Let me talk you through plotting the finished sheet to A3, save it as a PDF and file it in

I am going to explain rendering the finished view with tone and texture to distinguish two

Set me five practice tasks on what is meant by the first quadrant and why technical drawin

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Write a short SS2 Technical Drawing answer about annotate every material with leader lines

Give me a wrong or muddled explanation of determine the lines of intersection of two regul

Give me a practical task on determine the intersection of a 30 mm square prism entering a

Show me a worked example on drawing the lines of intersection of two square prisms meeting

Let me talk you through drawing to 1:10 the elevation and horizontal section of a casement

I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,

Show me a worked example on the motion at the needle of a treadle sewing machine when the

Give me a wrong or muddled explanation of drawing a four-bar linkage to given link lengths

Show me a worked example on what happens to the output at a dead-centre position with an e

Write a short SS2 Technical Drawing answer about the conic section produced by each of fou

Show me a worked example on why the cut face appears as a straight line in one view and an

Show me a worked example on cut, fold and assemble the developments in cardboard with an e

Write a short SS2 Technical Drawing answer about determine the curve of intersection of tw

Quiz me on develop the surfaces of the intersecting prisms and pyramids, showing the openi

Show me a worked example on four line types used in orthographic drawing and the purpose o