Technical Drawing

Give me a practice set on cutting paper cylinder to show that the seam edge of the develop

Show me a worked example on why a line parallel to a plane appears in true length in the v

Set me five practice tasks on calculating the stroke of a slider-crank whose crank radius

Show me a worked example on what happens to the output at a dead-centre position with an e

I am revising True Shapes I for SS2 Technical Drawing. Test me on determine the true shape

Give me a practice set on out the standard layout on the board, moving the station point t

I am going to explain rendering the finished view with tone and texture to distinguish two

Show me a worked example on the angle of inclination of the lamina to the horizontal plane

Take visual ray method, drawing rays from the station point through each plan corner to th

Give me a wrong or muddled explanation of drawing a first auxiliary elevation of a shaped

Set me five practice tasks on why the height of a point is transferred unchanged into an a

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Set me five practice tasks on calculating the number of risers and the going for a floor-t

Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at

Set me a small project on twelve-position method on the board, stressing that each crank p

Write a short SS2 Technical Drawing answer about the conic section produced by each of fou

Write a short SS2 Technical Drawing answer about determine the curve of intersection of tw

Give me a practice set on paper tube into a slot cut in a larger tube to show the saddle c

Give me a wrong or muddled explanation of determine the lines of intersection of two regul

Let me talk you through the effect on the finished view of moving the station point from t