Technical Drawing

Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle

Be my SS1 Technical Drawing teacher for this one point: 2. Plot the locus of a point on a

I am going to explain 3. Determine true lengths of the edges of full and truncated solids

Show me a worked example on 4. Produce models of geometrical solids from their development

Let me talk you through 3. Produce the front elevation, end elevation and plan of a given

Write a short SS1 Technical Drawing answer about 4. Interpret a three-view orthographic dr

Be my SS1 Technical Drawing teacher for this one point: 1. Identify the types of pictorial

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a

Give me a practice set on cavalier and cabinet oblique of the same block so students can s

I am going to explain 3. Use construction layers to build up complex isometric shapes to y

You are my personal SS1 Technical Drawing tutor. Teach me 1. Define technical drawing in y

You are my personal SS1 Technical Drawing tutor. Teach me 1. Identify the types of lines u

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p

Show me a worked example on 1. State the principle of tangency and its applications with a

Show me a worked example on the meaning of development and its applications with an error

Act as my study partner. I will teach you 3. Differentiate between isometric and non-isome

Let me talk you through 3. Construct isometric arcs and fillets from the Isometric Drawing