Technical Drawing

Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent

Quiz me on constructing the involute of a circle of 40 mm diameter for one complete revolu

Quiz me on applying the correct line types for outline, hidden detail, centre lines and co

You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a

Take constructing an involute of a circle and a cycloid on one A3 sheet out of the textboo

Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro

I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse

Give me a practice set on modelling-clay cone at four angles in front of the class for SS2

Show me how measuring the major and minor axes of their ellipse works in real life in Nige

Show me a worked example on why the cut face appears as a straight line in one view and an

Write a short SS2 Technical Drawing answer about constructing an isometric view from given

Give me a practical task on enclosing box on the board and removes material step by step s

Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from

Quiz me on the classification of floors as solid or suspended, from the SS2 Technical Draw

Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral

Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T

Set me a quick recall test on constructing a parabola by the focus and directrix method fo

Set me a small project on generating circle into twelve equal parts, the kind I could fini

I am revising Development and Card Models for SS2 Technical Drawing. Test me on assessed A

Set me a quick recall test on drawing a circle in perspective by enclosing it in a square