Technical Drawing
AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →283 prompts matching "Constructing 60 and 90 degree angles with compasses"
WAEC prep: Measuring and state the major and minor axes of the true shape obtained, in millimetres
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Subscribe to unlock allQuiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Subscribe to unlock allProject task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Subscribe to unlock allSpot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Subscribe to unlock allQuiz: Applying a dimension style with 3 mm text
I am revising Computer-Aided Drawing II for SS2 Technical Drawing. Test me on applying a d
Subscribe to unlock allPractice set: Rotating the UCS and setting up a viewport so the auxiliary direction becomes horizontal on
Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire
Subscribe to unlock allReal-life Nigeria: Comparing the CAD auxiliary with their Week 8 board drawing
Take comparing the CAD auxiliary with their Week 8 board drawing out of the textbook. Desc
Subscribe to unlock allSpot my mistake: Produce, dimension and plot an auxiliary elevation of a truncated solid on A3 at 1:1
Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca
Subscribe to unlock allWAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Subscribe to unlock allSpot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
Subscribe to unlock allWAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Subscribe to unlock allPractice set: The term foreshortening with a sketched example
Set me five practice tasks on the term foreshortening with a sketched example, at the leve
Subscribe to unlock allWAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Subscribe to unlock allPractice set: Practising crating and proportion exercises
Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr
Subscribe to unlock allReal-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
Subscribe to unlock allPractice set: Examining photographs of local soils and foundations
Give me a practice set on examining photographs of local soils and foundations for SS2 Tec
Subscribe to unlock allTeach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding
You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl
Subscribe to unlock allQuiz: The parts of a door and of a window: frame
I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part
Subscribe to unlock allProject task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Subscribe to unlock allSpot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
Subscribe to unlock all