Technical Drawing

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Give me a practice set on comparing the two curves and account for any difference for SS2

Set me a quick recall test on sketching freehand the mechanism of a pair of scissors at SS

Give me a wrong or muddled explanation of drawing a four-bar linkage to given link lengths

Set me five practice tasks on calculating the stroke of a slider-crank whose crank radius

Show me how measuring the major and minor axes of their ellipse works in real life in Nige

Show me a worked example on why the cut face appears as a straight line in one view and an

Take swap sheets and mark each other's work against a three-point checklist out of the tex

Show me a worked example on cut, fold and assemble the developments in cardboard with an e

Show me a worked example on three uses of perspective drawing and distinguish it from isom

Show me a worked example on four line types used in orthographic drawing and the purpose o

Show me a worked example on dimension a drawing using the aligned and the unidirectional s

Set me five practice tasks on why the height of a point is transferred unchanged into an a

Show me a worked example on drawing the auxiliary views of a full hexagonal prism and a sq

You are my personal SS2 Technical Drawing tutor. Teach me how a second auxiliary view is u

Show me a worked example on drawing the second auxiliary elevation of a shaped block and l

Write a short SS2 Technical Drawing answer about drawing the auxiliary elevation and auxil

Show me a worked example on producing and plot an isometric drawing of a given block at 1:

Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire

Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca