Technical Drawing

Show me a worked example on why the cut face appears as a straight line in one view and an

Show me a worked example on cut, fold and assemble the developments in cardboard with an e

I am revising Development and Card Models for SS2 Technical Drawing. Test me on assessed A

Give me a practice set on cutting paper cylinder to show that the seam edge of the develop

Show me a worked example on suggest, with reasons, a suitable board thickness and folding

I am going to explain assessed AO3, and intersecting cylinders appear in WAEC and NECO Pap

Give me a practice set on vertical edges of both prisms and shows how each edge of the bra

Show me a worked example on three uses of perspective drawing and distinguish it from isom

I am revising Perspective Drawing I for SS2 Technical Drawing. Test me on drawing a rectan

Give me a practice set on out the standard layout on the board, moving the station point t

I am going to explain rendering the finished view with tone and texture to distinguish two

Show me a worked example on four line types used in orthographic drawing and the purpose o

Show me a worked example on dimension a drawing using the aligned and the unidirectional s

Give me a practical task on enclosing box on the board and removes material step by step s

I am going to explain A first and a second auxiliary view, and an auxiliary elevation from

Show me a worked example on drawing the auxiliary views of a full hexagonal prism and a sq

I am revising Auxiliary Views II for SS2 Technical Drawing. Test me on assessed AO1 and AO

Show me a worked example on drawing the second auxiliary elevation of a shaped block and l

Let me talk you through drawing the auxiliary elevation and auxiliary plan of a truncated

Write a short SS2 Technical Drawing answer about drawing the auxiliary elevation and auxil