Use AI with an adult nearby, and check answers together.
All practicals

SS 2 · Physics

Resistance of a wire and resistivity

Practical code SL-S2-X14

Report a problem

Found something wrong? Telling us is how it gets fixed.

Aim: To show that the resistance of a wire is proportional to its length, and to find the resistivity of constantan.

Apparatus

  • About 1.2 m of SWG 28 constantan wire taped along a metre rule
  • A micrometer screw gauge
  • Two 1.5 V dry cells
  • A key
  • A rheostat
  • An ammeter (0–1 A)
  • A voltmeter (0–3 V)
  • A crocodile clip and a jockey
  • Connecting wires

Method

  1. Measure the diameter of the wire with the micrometer at three places along it, turning it through 90° each time, and find the mean.
  2. Clip one lead to the wire at the 0 mark and press the jockey at L = 0.20 m.
  3. Close the key, read the ammeter and the voltmeter, then open the key.
  4. Repeat for L = 0.40, 0.60, 0.80 and 1.00 m. Work out R = V ÷ I for each.
  5. Plot R against L. The gradient is R/L.
  6. Find the cross-sectional area A = πd²/4 and the resistivity ρ = gradient × A.

Safety: In a real laboratory, open the key between readings: the thin wire heats up and gets hot enough to hurt, and its resistance changes. Use cells only, never the mains.

This practical is part of Science Lab

It comes with a Science Lab pass for SS 1 to 3 (₦12,000 a term), with every other practical for that stage, and also with Exam Boost for WAEC/NECO in Physics. You can try one practical free.

© 2026 PromptPaddi Limited. All rights reserved.