Use AI with an adult nearby, and check answers together.
All practicals

SS 3 · Physics

Potentiometer: comparing e.m.f.s and internal resistance

Practical code SL-S3-X05

Report a problem

Found something wrong? Telling us is how it gets fixed.

Aim: To compare the e.m.f.s of a Leclanché cell and a Daniell cell, and to find the internal resistance of the Leclanché cell, with a potentiometer that draws no current from the cell at balance.

Apparatus

  • A potentiometer (100 cm of uniform wire on a board)
  • A 2 V accumulator (driver cell), a rheostat and a key
  • A Leclanché cell and a Daniell cell
  • A two-way key
  • A centre-zero galvanometer and a jockey
  • A resistance box (1–5 Ω) with a second key
  • A voltmeter, for comparison
  • Connecting wires

Method

  1. Join the + of the driver accumulator to end A of the wire, and the + of each test cell to A as well.
  2. Close the driver key. Tap the jockey along the wire to find the balance length l₁ for the Leclanché cell (no deflection).
  3. Switch the two-way key to the Daniell cell and find its balance length l₂. Then E₁/E₂ = l₁/l₂.
  4. With the Leclanché cell, close the second key so the resistance box R is across it. Find the new balance length l for R = 1 to 5 Ω.
  5. Work out r = R(l₀/l − 1), or plot 1/l against 1/R: r = gradient ÷ intercept.

Safety: In a real laboratory, the accumulator contains acid: keep it upright and do not touch its terminals together. Open the keys between readings. Use cells only, never the mains.

This practical is part of Science Lab

It comes with a Science Lab pass for SS 1 to 3 (₦12,000 a term), with every other practical for that stage, and also with Exam Boost for WAEC/NECO in Physics. You can try one practical free.

© 2026 PromptPaddi Limited. All rights reserved.