Use AI with an adult nearby, and check answers together.
All practicals

SS 3 · Physics

Metre bridge: unknown resistance and resistivity

Practical code SL-S3-X04

Report a problem

Found something wrong? Telling us is how it gets fixed.

Aim: To find an unknown resistance X with a metre bridge, using the balance condition X/R = l/(100 − l), and from it the resistivity of the wire in X.

Apparatus

  • A metre bridge (100 cm of uniform wire on a board with brass strips and two gaps)
  • A coil X of constantan wire, 0.64 m long and 0.40 mm in diameter
  • A resistance box R
  • A centre-zero galvanometer
  • A jockey
  • A 1.5 V dry cell and a key
  • Connecting wires

Method

  1. Put X in the left gap and the resistance box in the right gap. Connect the cell and key across the ends A and B of the wire.
  2. Join the galvanometer from the middle terminal D to the jockey.
  3. Set R = 1 Ω, close the key and tap the jockey on the wire (do not slide it) to find where the galvanometer shows no deflection.
  4. Record the balance length l from A. Repeat for R = 2, 3, 4 and 5 Ω.
  5. Swap X and R and repeat, so end errors cancel when the results are averaged.
  6. Plot (100 − l)/l against R: the gradient is 1/X. Then ρ = X A / L for the coil.

Safety: In a real laboratory, open the key between readings so the cell and wire do not heat, use cells only (never the mains), and tap the jockey gently so the thin wire is not cut.

This practical is part of Science Lab

It comes with a Science Lab pass for SS 1 to 3 (₦12,000 a term), with every other practical for that stage, and also with Exam Boost for WAEC/NECO in Physics. You can try one practical free.

© 2026 PromptPaddi Limited. All rights reserved.