Use AI with an adult nearby, and check answers together.
All practicals

SS 2 · Chemistry

Electrolysis of CuSO₄ and Faraday's first law

Practical code SL-S2-X19

Report a problem

Found something wrong? Telling us is how it gets fixed.

Aim: To show that the mass of copper deposited is proportional to the charge passed, and to find the current from the gradient of a mass–time graph.

Apparatus

  • Beaker of copper(II) tetraoxosulphate(VI) (copper(II) sulphate) solution, CuSO₄(aq)
  • Two copper electrodes (and two carbon electrodes for comparison)
  • DC supply, ammeter, rheostat and switch
  • Stop clock
  • Electronic balance (reads to 0.001 g)
  • Distilled water and a warm-air dryer

Method

  1. Clean the copper cathode with sandpaper, rinse it, dry it and weigh it.
  2. Set up the circuit and adjust the rheostat so the ammeter reads 1.00 A, keeping it steady.
  3. After 5 minutes switch off, remove the cathode, rinse it gently in distilled water, dry it and weigh it.
  4. Replace it and continue, weighing again at 10, 15 and 20 minutes in total.
  5. Calculate the mass deposited each time and the charge Q = It, and plot mass of copper against time.
  6. Find the gradient (g/s) and use it to find the current: I = gradient × 2F ÷ M(Cu), with F = 96500 C/mol.
  7. Repeat with carbon electrodes and compare what happens at the anode.

Safety: In a real laboratory, use a low-voltage DC supply only (never mains), switch off before handling the electrodes, and avoid skin contact with copper(II) sulphate, which is harmful.

This practical is part of Science Lab

It comes with a Science Lab pass for SS 1 to 3 (₦12,000 a term), with every other practical for that stage, and also with Exam Boost for WAEC/NECO in Chemistry. You can try one practical free.

© 2026 PromptPaddi Limited. All rights reserved.