Use AI with an adult nearby, and check answers together.
All practicals

JSS 2 · Physics

Heat travelling along rods

Practical code SL-J2-X05

Report a problem

Found something wrong? Telling us is how it gets fixed.

Aim: To compare how well copper, iron, glass and wood conduct heat, by timing how long it takes for a pin to fall from the end of each rod.

Apparatus

  • Four rods of the same length: copper, iron, glass and wood
  • Wax and four pins
  • A burner
  • A stand to hold the rods
  • A stopwatch

Method

  1. Stick a pin with melted wax to the far end of each rod.
  2. Arrange the rods so that their other ends are all in the burner flame.
  3. Light the burner and start the stopwatch.
  4. Watch each pin. When the wax melts and the pin falls, note the time.
  5. Record the time for each rod. If a pin has not fallen after 20 minutes, say so.

Safety: In a real laboratory, tie back long hair, keep your hands away from the flame and the hot ends of the rods, and let everything cool before touching it.

This practical is part of Science Lab

It comes with a Science Lab pass for JSS 1 to 3 (₦8,000 a term), with every other practical for that stage, the thirty Basic Science papers, and also with Exam Boost for BECE Basic Science. You can try one practical free.

© 2026 PromptPaddi Limited. All rights reserved.