Technical Drawing

Show me a worked example on preparing developments of prisms and cylinders and develop mod

Show me how each line type against the standard line chart. Students produce a reference s

Show me how standard line-type and abbreviation tables. Students produce a reference sheet

I am going to explain 3. Determine true lengths of the edges of full and truncated solids

Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development

Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech

Show me how rotation method for finding the true length of a slant edge. Students determin

Write a short SS1 Technical Drawing answer about 4. Use drawing materials and instruments

Show me a worked example on producing vertical and inclined lettering to consistent height

Write a short SS1 Technical Drawing answer about 4. Divide a straight line into any number

Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Show me a worked example on drawing and interpret both projection symbols with an error so

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p

Write a short SS1 Technical Drawing answer about 4. Verify the accuracy of an enlargement

Show me a worked example on success: calculated areas of original and converted figures ag

Show me a worked example on 1. State the principle of tangency and its applications with a

Show me a worked example on consolidation of polygons, scales, enlargement and reduction,

Show me a worked example on the meaning of development and its applications with an error

Show me a worked example on 4. Produce models of geometrical solids from their development