Technical Drawing
AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →296 prompts matching "Paper tube into a slot cut in a larger tube to show the saddle curve before the"
Teach me: Dividing a straight line into equal parts by construction
You are my personal SS3 Technical Drawing tutor. Teach me dividing a straight line into eq
Subscribe to unlock allPractice set: Dividing a stated line into seven equal parts
Act as my SS3 Technical Drawing tutor. Give me five practice questions on dividing a state
Subscribe to unlock allWAEC prep: Dividing an angle into a given number of equal parts
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock allSpot my mistake: Dividing a line into equal parts by measuring with a rule instead of by construction
Act as my SS3 Technical Drawing tutor. Write a short answer on dividing a line into equal
Subscribe to unlock allTeach me: The offset section and its stepped cutting plane
You are my personal SS3 Technical Drawing tutor. Teach me the offset section and its stepp
Subscribe to unlock allTeach me: The A2 ISO drawing board and how the sheet is fixed to it
You are my personal SS3 Technical Drawing tutor. Teach me the A2 ISO drawing board and how
Subscribe to unlock allQuiz: The cutting plane and its indication
Act as my SS3 Technical Drawing tutor and quiz me on the cutting plane and its indication.
Subscribe to unlock allTeach me: How the object sits relative to the planes in first angle
You are my personal SS3 Technical Drawing tutor. Teach me how the object sits relative to
Subscribe to unlock allSpot my mistake: Hatching the whole sectional view rather than only what the cutting plane passes through
Act as my SS3 Technical Drawing tutor. Write a short answer on hatching the whole sectiona
Subscribe to unlock allSpot my mistake: Showing the steps of an offset cutting plane as lines in the sectional view
Act as my SS3 Technical Drawing tutor. Write a short answer on showing the steps of an off
Subscribe to unlock allLet me explain: Compasses, dividers and the protractor
I have just studied compasses, dividers and the protractor in my SS3 Technical Drawing cla
Subscribe to unlock allPractice set: Constructing a diagonal scale to a stated RF
Act as my SS3 Technical Drawing tutor. Give me five practice questions on constructing a d
Subscribe to unlock allPractice set: Constructing stated angles without a protractor
Act as my SS3 Technical Drawing tutor. Give me five practice questions on constructing sta
Subscribe to unlock allQuiz: Drawing a tangent to a circle from an external point
Act as my SS3 Technical Drawing tutor and quiz me on drawing a tangent to a circle from an
Subscribe to unlock allLet me explain: Internal and external common tangents to two circles
I have just studied internal and external common tangents to two circles in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in:
WAEC prep: Applying tangency to a spanner or anchor outline
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock allWAEC prep: Constructing a figure equal in area to a given one
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Subscribe to unlock allPractice set: Reducing a polygon to two thirds of its area
Act as my SS3 Technical Drawing tutor. Give me five practice questions on reducing a polyg
Subscribe to unlock allLet me explain: The angle of inclination of a line to a plane
I have just studied the angle of inclination of a line to a plane in my SS3 Technical Draw
Subscribe to unlock allPractice set: Drawing one object in all three pictorial methods
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing one obje
Subscribe to unlock all