Technical Drawing

Take measuring openings in the school buildings out of the textbook. Describe a real Niger

Be my SS2 Technical Drawing teacher for this one point: tread, riser, going, nosing, strin

Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral

Show me how sketching two further staircase types and label six parts on each works in rea

Let me talk you through the lintel over an opening with the correct bearing and reinforcem

Take marking each other's sheets against a five-point checklist out of the textbook. Descr

Give me a wrong or muddled explanation of drawing a king post truss of 6 m span to a scale

Give me a practice set on tension and compression members on a board sketch of a king post

Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me

Show me how building a simple card or straw truss, load it at the apex works in real life

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Give me a practice set on comparing the two curves and account for any difference for SS2

Give me a practice set on lay a plastic gear or bicycle sprocket over their finished invol

Show me a worked example on two products that use an involute profile with an error somewh

I am going to explain graphic Products candidates meet the same content when drawing movin

Show me how building a working card model of a simple four-bar linkage from strips works i

Show me a worked example on here the locus plot supplies the evidence with an error somewh

Set me a small project on twelve-position method on the board, stressing that each crank p

Show me a worked example on what happens to the output at a dead-centre position with an e

Set me five practice tasks on the four conic sections and the cutting plane that produces