Technical Drawing

Be my SS1 Technical Drawing teacher for this one point: 2. Plot the locus of a point on a

Quiz me on 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism, fr

Set me five practice tasks on the meaning of a locus and plot the loci of a point in named

Set me five practice tasks on construction accuracy reported separately to parents, at the

Give me a wrong or muddled explanation of 4. Prepare the pattern development of a pyramid

Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development

Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech

Set me a quick recall test on 2. Place dimensions on circles, arcs and chamfers at SS1 lev

Give me a wrong or muddled explanation of 4. Distinguish chain, parallel and running dimen

Set me five practice tasks on constructing isometric squares, rectangles, arcs and circles

Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr

Be my SS1 Technical Drawing teacher for this one point: 2. Demonstrate the types of obliqu

Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr

Set me five practice tasks on portfolio and board accuracy recorded separately, at the lev

Show me a worked example on practise healthy habits with an error somewhere in it. Do not

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Show me a worked example on 2. State the properties of each type of quadrilateral with an

Show me a worked example on constructing special quadrilaterals and one from four sides an

Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their