Technical Drawing

Show me how rotation method for finding the true length of a slant edge. Students determin

Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development

Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech

Give me a wrong or muddled explanation of 4. Distinguish chain, parallel and running dimen

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

Set me five practice tasks on constructing isometric squares, rectangles, arcs and circles

Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr

Give me a wrong or muddled explanation of 4. Produce a finished isometric drawing of a com

Set me five practice tasks on producing a composite isometric drawing from orthographic vi

Be my SS1 Technical Drawing teacher for this one point: 2. Demonstrate the types of obliqu

Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr

Set me five practice tasks on success: cabinet oblique drawn with receding dimensions corr

Show me a worked example on and produce all six line types at correct weight with an error

Show me a worked example on success: every constructed angle within ±1° when checked with

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Show me a worked example on constructing an inscribed, a circumscribed and an escribed cir

Show me a worked example on constructing special quadrilaterals and one from four sides an

Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their

Show me a worked example on drawing and interpret both projection symbols with an error so