Technical Drawing

Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech

Set me a quick recall test on 2. Place dimensions on circles, arcs and chamfers at SS1 lev

Give me a wrong or muddled explanation of 4. Distinguish chain, parallel and running dimen

Set me five practice tasks on dimension circles, arcs, chamfers and vertical, horizontal a

Be my SS1 Technical Drawing teacher for this one point: 1. Identify the types of pictorial

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a

Set me five practice tasks on constructing isometric squares, rectangles, arcs and circles

Be my SS1 Technical Drawing teacher for this one point: 2. Demonstrate the types of obliqu

Show me a worked example on producing a sheet using at least five instruments correctly wi

I am an SS1 student studying Board Practice: Title Block and Lettering in Technical Drawin

Show me a worked example on and produce all six line types at correct weight with an error

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Write a short SS1 Technical Drawing answer about 2. Draw a circle and label its parts corr

Show me a worked example on constructing an inscribed, a circumscribed and an escribed cir

Show me a worked example on constructing special quadrilaterals and one from four sides an

Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their

Show me a worked example on drawing and interpret both projection symbols with an error so

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p